DATA & EQUIPMENT
THE BMW S 1000 R
Carries the DNA from racing both in theory and in practice – the figures prove it. Fully fuelled and fully equipped, including M package with 198.7 kg at 165 hp. No-one can match that in a hurry.
TECHNICAL DATA
Engine
Type
Oil/water-cooled four-cylinder four-stroke in-line engine with four valves per cylinder
Bore / stroke
80 mm x 49.7 mm
Capacity
999 cc
Ratet output
121 kW (165 hp) at 11,000 rpm
Max. torque
114 Nm at 9,250 rpm
Compression ratio
12.5 : 1
Mixture control
Electronic intake pipe fuel injection, BMS-K+ electronic engine management with overrun cut-off, twin-spark ignition: BMS-O with e-gas
Emission control
Regulated three-way catalytic converter
Performance / fuel consumption
Maximum speed
Over 200 km/h
Fuel consumption per 100 km based on WMTC
6.2 l
CO2 emission based on WMTC
144 g/km
Fuel type
Super plus lead-free (max. 5 % ethanol, E5) / ROZ 98 / 93 AKI
Electrical system
Alternator
Permanent magnet generator with 450 W (nominal capacity)
Battery
12 V / 8 Ah, maintenance-free
Power transmission
Clutch
Multi-disc oil bath (anti-hopping) with self-reinforcement
Gearbox
Synchromesh six-speed gearbox, built into engine housing
Drive
Chain 525 17/45
Traction Control
DTC
Chassis / brakes
Frame
Bridge-type aluminium laminate frame with load-bearing engine
Front wheel location / suspension
Upside-down telescopic fork with a diameter of 45 mm, spring preload and adjustable rebound and compression stage
Rear wheel location / suspension
Aluminium underbeam swinging arm, Full-Floater Pro, central shock absorber, adjustable rebound and compression damping and adjustable spring preload
Suspension travel, front / rear
120 mm / 117 mm
Wheelbase
1,450 mm
Castor
96 mm
Steering head angel
65,8°
Wheels
Cast aluminium
Rim dimensions, front
3.50 x 17"
Rim dimensions, rear
6.00 x 17"
Tyre, front
120/70 ZR 17
Tyre, rear
190/55 ZR 17 (200/55 ZR 17)
Brake, front
Twin-disc brake with a diameter of 320 mm, four-piston fixed calliper
Brake, rear
Single disc brake with a diameter of 220 mm, one-piston floating calliper
ABS
BMW Motorrad Integral ABS, partial integral
ABS Pro
Dimensions / weights
Seat height
830 mm (OE driver seat low: 810 mm, OE driver seat high: 850 mm)
Inner leg curve
1,835 mm (OE low rider seat: 1,815 mm, OE high rider seat: 1,858 mm)
Usable tank volume
16.5 l
Reserve
approx. 4 l
Length
2,090 mm
Height (excl. mirrors)
1,115 mm
Width (excl. mirrors)
812 mm
Dry weight
Unladen weight, road ready, fully fuelled
199 kg (with M package including M carbon wheels: 194 kg) 1)
Permitted total weight
407 kg
Payload (with standard equipment)
208 kg
EQUIPMENT
Standard equipment:
Optional equimpent:
- Full LED Light
- Three riding modes (Rain, Road, Dynamic, incl. HSC)
- Six-axis sensor box incl. ABS Pro & DTC
- TFT display with connectivity
- Adjustable handlebar position
Optional equimpent:
- DDC chassis
- Riding modes Pro (incl. Dynamic Pro, fully adjustable, incl. Wheelie Control, HSC Pro, MSR, DBC)
- Shift Assist Pro
- Headlight Pro (daytime running light icon & adaptive cornering light; observe country specific regulations)
- Keyless Ride
- RDC (Tyre Pressure Control)
- ECALL (if available)
- M package
- M carbon and forged wheels
- M Lightweight Battery
- Carbon package and billet packs
- and much more
Optional accessories:
- Rear bags and soft bags
- Carbon trim panel components
- Billet parts
- and much more
